When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $85.99
Fitment:
For Infiniti QX4 1997-2003
For Infiniti QX56 2004-2010
For Nissan Armada 2004-2016(2017+ has 14x1.5 studs, will not fit)
For Nissan Frontier 1998-2004
For Nissan Pathfinder 1987-2004
For Nissan Pickup 1986-2022
For Nissan Titan 2004-2023
For Nissan Xterra 1999-2004
Pleasecheckcompatibilitynotes&descriptionforaccurateinformation.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
TIPS:
1. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
2. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters,Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
Specifications:
Spacer Thickness: 1.5 inch or 38mm
Vehicle bolt pattern: 6x5.5 inch or 6x139.7 mm
Wheelbolt pattern:6x5.5 inch or 6x139.7 mm
Thread Size:12x1.25
Bolt Shack Length: 32 mm
Torqued Down By Hand At: 70-80 FT/LBS
Hub Bore: 108 mm
Package including:
4x Wheel Spacers
(If there's a small tube of pink liquid in the package,it's thread locker.)
Installationtips:
1: Safely jack up the appropriate end of the vehicle and set if firmly on stands and remove the wheel nuts/bolts and wheels.
2: Remove the retaining washers and use a wire brush or abrasive pad to clean the flat surface to remove rust and corrosion. If the surface is not clean, it will vibrate.
3: Place a wheel spacer over the axle hub studs and make sure it sits firmly against the hub, then tighten the nuts in a crisscross pattern.
4: Place the wheel back onto the spacer and install the nuts in a crisscross pattern5: Lower the vehicle to the ground.
**After the tire is enlarged, to leave enough room for the front wheel steering.At the same time to strengthen the stability of the vehicle.During the installation process, it is necessary to observe that the gasket or flange can be completely fitted with the contact surface of the wheel hub and the wheel shaft, and try to make the added gasket or flange form a whole with the wheel hub and the wheel shaft. If you look directly above the car, the rims do not go beyond the top edge of the leaf, and it is best to achieve just flush.
Notes:
1. Professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.
2. All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.
3. Any damage during installation will not be refunded. Any modify action is excludes warranty.Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
4. If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.
Item SpecificsManufacturer Part Number 11751781Brand APKVehicle Bolt Pattern 6x5.5" or 6x139.7mmManufacturer Warranty 1 YearHub Center Bore 108mmVintage Car Part NoInterchange Part Number For Nissan Frontier/ Xterra 1999-2004, Pathfinder 1987-2004OE/OEM Part Number For Nissan Armada 2004-2016, Titan 2004-2023, Pickup 1986-2022Superseded Part Number For Infiniti QX4 1997-2003 QX56 2004-2010Universal Fitment NoType Wheel SpacerColor BlackTorqued Down By Hand At 70-80 FT/LBSMaterial High Quality t6 6061 Billet AluminumPackage Gross Weight 15.59lbWheel Bolt Pattern 6x5.5" or 6x139.7mmNumber of Pieces 4Thread Pitch 12mm x 1.25 or 12x1.25 or M12x1.25Outer Diameter 176mmItems Included 4 pcs wheel spacersHubcentirc NoBolt Shank Length 32mmThickness 1.5" or 38mmStud Grade 10.9Surface Finish CNC Machined Polished Aluminum FinishLug Patterns 6 Lugs
Payment
1. We accept PayPal only.
2. All major credit cards are accepted through secure payment processor PayPal.
3. Payment must be received within 7 business days of auction closing.
4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
- We ship to youreBay or Paypaladdress. Please make sure youreBay and Paypaladdress is correct before you pay.
- Items will be shippedwithin 1-3 businessday when we received payment.
- Delivery time depends on destination and other factors;
- International buyers please note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.Contact Us
Our working time:
Beijing time:Monday to Saturday 8:00 am to 6:00
We do not work holidays in China
If you send email to us,In our working hours will be resumed within 48 hours.
If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution
Fitment:
For Infiniti QX4 1997-2003
For Infiniti QX56 2004-2010
For Nissan Armada 2004-2016(2017+ has 14x1.5 studs, will not fit)
For Nissan Frontier 1998-2004
For Nissan Pathfinder 1987-2004
For Nissan Pickup 1986-2022
For Nissan Titan 2004-2023
For Nissan Xterra 1999-2004
Pleasecheckcompatibilitynotes&descriptionforaccurateinformation.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
TIPS:
1. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
2. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters,Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
Specifications:
Spacer Thickness: 1.5 inch or 38mm
Vehicle bolt pattern: 6x5.5 inch or 6x139.7 mm
Wheelbolt pattern:6x5.5 inch or 6x139.7 mm
Thread Size:12x1.25
Bolt Shack Length: 32 mm
Torqued Down By Hand At: 70-80 FT/LBS
Hub Bore: 108 mm
Package including:
4x Wheel Spacers
(If there's a small tube of pink liquid in the package,it's thread locker.)
Installationtips:
1: Safely jack up the appropriate end of the vehicle and set if firmly on stands and remove the wheel nuts/bolts and wheels.
2: Remove the retaining washers and use a wire brush or abrasive pad to clean the flat surface to remove rust and corrosion. If the surface is not clean, it will vibrate.
3: Place a wheel spacer over the axle hub studs and make sure it sits firmly against the hub, then tighten the nuts in a crisscross pattern.
4: Place the wheel back onto the spacer and install the nuts in a crisscross pattern5: Lower the vehicle to the ground.
**After the tire is enlarged, to leave enough room for the front wheel steering.At the same time to strengthen the stability of the vehicle.During the installation process, it is necessary to observe that the gasket or flange can be completely fitted with the contact surface of the wheel hub and the wheel shaft, and try to make the added gasket or flange form a whole with the wheel hub and the wheel shaft. If you look directly above the car, the rims do not go beyond the top edge of the leaf, and it is best to achieve just flush.
Notes:
1. Professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.
2. All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.
3. Any damage during installation will not be refunded. Any modify action is excludes warranty.Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
4. If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.
Item SpecificsManufacturer Part Number :11751781Brand :APKVehicle Bolt Pattern :6x5.5" or 6x139.7mmManufacturer Warranty :1 YearHub Center Bore :108mmVintage Car Part :NoInterchange Part Number :For Nissan Frontier/ Xterra 1999-2004, Pathfinder 1987-2004OE/OEM Part Number :For Nissan Armada 2004-2016, Titan 2004-2023, Pickup 1986-2022Superseded Part Number :For Infiniti QX4 1997-2003 QX56 2004-2010Universal Fitment :NoType :Wheel SpacerColor :BlackTorqued Down By Hand At :70-80 FT/LBSMaterial :High Quality t6 6061 Billet AluminumPackage Gross Weight :15.59lbWheel Bolt Pattern :6x5.5" or 6x139.7mmNumber of Pieces :4Thread Pitch :12mm x 1.25 or 12x1.25 or M12x1.25Outer Diameter :176mmItems Included :4 pcs wheel spacersHubcentirc :NoBolt Shank Length :32mmThickness :1.5" or 38mmStud Grade :10.9Surface Finish :CNC Machined Polished Aluminum FinishLug Patterns :6 LugsPaymentShippingReturnsContact Us
1. We accept PayPal only.
2. All major credit cards are accepted through secure payment processor PayPal.
3. Payment must be received within 7 business days of auction closing.
4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
- We ship to youreBay or Paypaladdress. Please make sure youreBay and Paypaladdress is correct before you pay.
- Items will be shippedwithin 1-3 businessday when we received payment.
- Delivery time depends on destination and other factors;
- International buyers please note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.
Our working time:
Beijing time:Monday to Saturday 8:00 am to 6:00
We do not work holidays in China
If you send email to us,In our working hours will be resumed within 48 hours.
If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution
All rights reserved.